ProComp__20Logo.jpg

All_20Terrain_20logo.gif

 

(1) 80,000 Km Street Tough Warranty - Severe Weather Rating
Pro Comp’s Advantage - Advanced tread technology stomps the competition. Only the Pro Comp All Terrain has a 80,000 Km warranty* and a Severe Weather rating.
(2) Dualguard™ Polyester Body PliesDualguard™
Polyester Body Plies consist of thick 2 ply polyester construction combined with a blend of dual side wall rubber allowing for maximum puncture resistance with total flexibility when using lower air pressure off-road without excessive heat build up.  
(3) Elliptical Siping Pattern
Pro Comp’s Advantage - Deep siping runs throughout the tread and interlocking shoulder lugs provide extra biting edges for excellent all weather traction. Tread pattern also allows for superior gripping power in snow conditions allowing the Pro Comp All Terrain to have its Severe Weather Rating. Only the Pro Comp All Terrain has this feature.
(4) Dual Radius Tread Arc
Pro Comp’s Advantage - The dual radius tread arc increases the tread contact patch for greater traction, maximising treadwear and smooth even wear throughout the tread life (80,000 Km warranty*).
(5) 50 Degree Triple Centre Lug Design
Pro Comp’s Advantage - Open high-void, all terrain, 50 degree interlocking centre treads provide excellent traction in dirt, sand and snow while maximising wear and performance.
 
 XTREME_20A_T_20logo.gif
 
XTREME ALL TERRAIN TYRES, THE ONLY DIRECTIONAL ALL TERRAIN.
16, 17, 18, 20 inch rims?, now it doesn’t matter, you don’t have to settle for less. The “NEW” Xtreme A/T gives you aggressive styling, wet weather traction, incredible off-road capabilities and long life. Using the [NEXT] Generation Tyre Technology lets Pro Comp give you what you’ve been waiting for, a tyre that’s equally at home on the street and in the dirt. “Watch Out there’s a “New Monster” under the bed!”.
YOU DON’T HAVE TO SETTLE FOR LESS!
• XTREME PERFORMANCE • XTREME TRACTION
• XTREME TREAD WEAR • XTREME LOOK
• XTREME LOAD CAPACITY• XTREME DURABILITY

 MudTerrainLogo.gif

 

(1) High Void Three Lug Shoulder Design
High Void Three Lug Shoulder Design Pro Comp’s Advantage - The high-void, three lug shoulder has a larger, more aggressive open grip spur, for increased traction and self-cleaning. The three staged lug is also pre-drilled for studs for driving on both snow and ice. This benefit is not available from most of the competition. 
(2) Twin Rib Siping Center Traction Zone
Pro Comp’s Advantage - Interlocking, open, aggressive twin high-void lug delivers extra traction. Add the 90 degree check pattern siping and it blows the competition away. No competition. No comparison. Only the Pro Comp Mud Terrain has this feature.
(3) Dualguard™ Polyester Body Plies
Dualguard™ Polyester Body Plies consist of thick 2 or 3 ply polyester construction combined with a blend of dual side wall rubber allowing for maximum puncture resistance with total flexibility when using lower air pressure off road without excessive heat build up. 
(4) Alternating Shoulder Lug Treatment
Pro Comp’s Advantage - Corner lugs with deep traction bars that help resist clog-up and maximises the biting edge for increased traction in mud and rocks.

 PCT_XTREME_MT_NEW.gif

 

Incorporates our proven "Tri-Ply" construction with Pro  Comp's new 10 Degree Radial Angle Technology which provides two radial polyester body plies and one outerply angled to 10 degrees.  This allows for maximum puncture resistance but still has predictability and flexibility on and off road.
 
Combine two layers of opposed-angle steel belting and a seemless layer spiral nylon over wrap for one of the industries toughest tyres on the road.  The extra thick sidewall treatments resist cuts and abrasions while the unique shoulder lugs enhance traction on the rock or in the mud.
 
 XTerrainLogo.gif
(1) Super Quiet Computerized Directional Pattern
Computerized Aided Design (CAD) allowed us to manipulate the wind travel through the directional tread pattern making the Xterrain quiet on the highway.
(2) Kerf Grooved Directional Lug Grips
Its staggered directionally grooved tread pattern has full length lug sipes for superior "On" or "Off Road" traction that makes it superior in mud, snow, slush, loose dirt, rock and road. 
(3) Full Depth Lug Sipes
Its alternating open lug shoulder grip spurs aid in increased traction and self-cleaning. The Xterrain’s extra thick side wall treatment helps resist scrapes and cuts, maximises a biting edge side wall for increased traction on rocks or in mud. 
(4) Extra Thick Sidewall Treatment
Two layers of opposed-angle steel belting spans the tread area for maximum puncture resistance. The opposed angle steel allows the tread to flex under lower air pressure to maximise traction in rock, mud and sand.
(5) Dualguard™ Polyester Body Plies
Dualguard™ Polyester Body Plies consist of thick 2 ply polyester construction combined with a blend of dual side wall rubber allowing for maximum puncture resistance with total flexibility when using lower air pressure off road without excessive heat build up.  
 
 
 Contact us for more info on sizes and specs on any of the Pro Comp Range!